Another temperature project, this time we will use a TMP102 to an LCD keypad shield The TMP102 device is a digital temperature sensor ideal for NTC/PTC thermistor replacement where high accuracy is required. The device offers an accuracy of ±0.5°C…
-
-
In this article we create a UV display project, we will use a Si1145 sensor which is connected to an LCD keypad shield and an Arduino Uno The Si1145/46/47 is a low-power, reflectance-based, infrared proximity, ultraviolet (UV) index, and ambient…
-
In this article we create a distance measurement ultrasonic project, we will use an Arduino Uno with an LCD Keypad shield. We will then connect the HY-SFR05 to this shield and display the readings on the LCD. Lets go and…
-
This Rich Shield for the Arduino has many useful components onboard such as LED’s, buttons and a buzzer. It is easy and great for learning arduino development and programming This is the shield with a little remote control, in this…
-
In this project we will get the current altitude and temperature using an MPL3115A2 pressure sensor connected to an LCD keypad shield fitted to an Arduino Uno Here is a little information regarding the sensor. The MPL3115A2 is a compact, piezoresistive,…
-
In this article we create a thermometer based project using an LCD shield, Arduino Uno and an MLX90615 sensor. Lets discuss the sensor first The MLX90615 is a miniature infrared thermometer for non-contact temperature measurements. Both the IR sensitive thermopile…
-
In this project we will create a basic gas sensor detector, we will use the CCS811 gas sensor and connect this to an LCD keypad shield. Lets look at the gas sensor first. The CCS811 is a low-power digital gas…
-
In this example we will create a temperature and altitude meter using a bm180 sensor and display the readings on an LCD shield Lets look at the BMP180 first The BMP180 is the new digital barometric pressure sensor of Bosch Sensortec,…
-
In this example we will create a temperature and humidity meter using a sht31 sensor and display the readings on an LCD shield SHT31 is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip…
-
In this example we will create a lux meter using a GA1A12S202 sensor and display the readings on an LCD shield The features of this sensor are as follows Output voltage increases with light on the sensor Logarithmic response not only…
-
Another project – this time were building another lux meter, we will use a TSL2561 sensor and display the readings on an LCD keypad shield Lets recap some information regarding the sensor This TSL2561 is an I2C light-to-digital converter TSL2561…
-
This time we are going to look at hooking up a DS1624 sensor to an LCD Keypad shield. We will display the temperature on the LCD. A reminder about the DS1624 The DS1624 consists of two separate functional units: a…
-
In this example we connect an AM2320 sensor to an LCD4884 shield which in turn is fitted to an Arduino Uno, we will then display the temperature and humidity readings on the LCD from the sensor. Lets look at some…
-
In this example we will display temperature readings from a TMP175 sensor on a Nokia LCD4884 shield The TMP75 and TMP175 devices are digital temperature sensors ideal for NTC and PTC thermistor replacement. The devices offer a typical accuracy of…
Newer Posts